What Is WPS on a Router? Should It Be On?

What is WPS on a router? The button that joins devices without typing the Wi-Fi password, why the PIN mode is risky, and when to turn WPS off.

6 min readFindMyIP Team
Add as a preferred source on Google
Two cute antenna gadgets with smiling faces beside a glowing round button, linked by violet cables in a tiny village

WPS (Wi-Fi Protected Setup) is a router feature that lets a device join your Wi-Fi without typing the password. You press the WPS button on the router, then start WPS on the printer, TV or extender within about two minutes, and the router hands the device your network details. There is also a PIN mode with an 8-digit code. The button is convenient; the PIN mode has a known security flaw, so it should be off.

How WPS works

WPS was created by the Wi-Fi Alliance to make joining a network easier, especially on devices with no keyboard (Wi-Fi Protected Setup, Wikipedia). It has two common modes:

  • Push button. You press the WPS button on the router (sometimes labelled with two curved arrows, or "Wi-Fi" on some models). The router opens a short pairing window, usually two minutes or less. A device that starts WPS in that window receives the network name and password, then connects like any other device. The window closes after the first device joins or when time runs out.
  • PIN. The router, or the device, shows an 8-digit PIN that you type on the other side. No button press is needed, which is exactly the problem described below.

WPS does not change your Wi-Fi password, your encryption or your public IP address. The new device simply joins your local network and gets a private address from your router, the same way it would after typing the password.

Why the WPS PIN is a security risk

In December 2011, researcher Stefan Viehböck showed that routers check the 8-digit PIN in two halves and say which half was wrong. The last digit is a checksum. That cuts the number of guesses from 100 million to at most 11,000, and an attacker in Wi-Fi range can try them all in hours (CERT/CC VU#723755). Once the PIN is found, the router gives out the real Wi-Fi password.

Some routers lock the PIN after several wrong tries, but not all do. In 2014 a second attack, called Pixie Dust, recovered the PIN offline on routers whose chips used weak random numbers (Wikipedia). On an affected router, changing your Wi-Fi password does not help while the PIN stays on, because the PIN leads to the new password too.

The push button is lower risk. Someone has to press the button on your router, so they need physical access, and the window is short.

What if you pressed WPS by accident?

This is one of the most common WPS questions, and the short answer is: nothing bad, in most cases.

  • A pairing window opens. The router's WPS light usually blinks for up to about two minutes, then stops on its own.
  • Only a device in WPS mode can join. A device must start WPS at the same time and be in range. Your neighbor's phone does not join by itself; someone would have to be pairing on purpose at that moment.
  • Nothing is reset or changed. Your password, network name and settings stay the same. A short press does not restart the router.
  • Watch for dual-use buttons. On some models, the same button also turns Wi-Fi off or resets the router when you hold it for longer. If your Wi-Fi went down after a long press, check the manual for your model before you press anything else.

If you want to be sure no one joined, sign in to the router's admin page. Its address is your default gateway, often 192.168.1.1 or 192.168.0.1. Open the list called Connected devices, Clients or DHCP clients. Each entry shows a name, a private IP and a MAC address. Anything you do not recognise can be blocked there. Then change the Wi-Fi password to be safe.

Should WPS be on or off?

  • Turn the PIN off. In the router's wireless or WPS settings, disable "WPS PIN" or "Router PIN". If your router only has one WPS switch, and you do not use WPS, turn the whole feature off.
  • Keep the button only if you use it. If you connect a printer or extender with WPS once a year, turn WPS on for that day and off again afterwards. Netgear recommends the same and says many of its newer routers ship with WPS off (Netgear).
  • Check after a firmware update. Some updates restore default settings. Look at the WPS page again after updating.
  • Your provider's router counts too. If your internet company supplied the router, its WPS settings are often in the provider's app or admin page. Ask support if you cannot find them.

Newer devices may offer a QR-code setup instead. The Wi-Fi Alliance's newer method is called Wi-Fi Easy Connect: you scan a code on the device with your phone rather than pressing a button.

How to connect a device with WPS safely

  1. Check the device supports WPS. Its manual or Wi-Fi menu says "WPS" or "push button".
  2. Start WPS on the device first, if it has a menu, so it is already waiting.
  3. Press the router's WPS button briefly, once. Do not hold it.
  4. Wait for the device to confirm the connection, usually within a minute.
  5. Turn WPS off again in the router settings if you only switched it on for this.

Once the device is online, open our speed test in a browser on that network to confirm the connection works. It measures download, upload and HTTP latency between your browser and FindMyIP.net. A device far from the router on a weak signal will show it here. If the connection fails completely, is the internet down in my area? walks through the checks.

Quick answers

Where is the WPS button on my router? Usually on the back or side, next to the power or reset button. Look for "WPS" or two curved arrows forming a circle.

Is WPS the same as the reset button? No. Reset clears your settings. On some routers one button does both, depending on how long you hold it, so check your manual.

Can someone hack my Wi-Fi through WPS? Through the PIN, on routers that do not block repeated guesses, yes. Through the button, only with physical access to the router. Turning the PIN off removes the main risk.

How we research and correct articles

Your privacy choices

Google Analytics stays off unless you accept. Cookieless Vercel Web Analytics counts anonymous page views for every visitor. All tools work either way. Privacy policy